Welcome to TELESIN Support

We're here for you

Tutorial Videos

TELESIN Underwater Diving Phone Case

Documentation

User Manual

TELESIN Underwater Diving Phone Case

FAQ

Total 5 results found

What is the water resistance depth?

The water resistance depth is 20 meters.

How to connect?

Press and hold the capture button for 2 seconds to power on. The indicator light will illuminate. In your phone's Bluetooth settings, select “TELESIN_SDC” to connect. If connection is not established within 2 minutes, the device will automatically power off.

What are the functions of the buttons?

Shutter button: Press and hold for 2 seconds: Power on/off; Single press: Start/stop recording; Focus button 1: Zoom out (wide angle); Focus button 2: Zoom in (telephoto) Mode button 1: Single press: Switch capture modes (e.g., photo/video); Press and hold for 2 seconds: Quickly launch camera from screen-off state; Mode button 2: Single press: Switch capture modes; Press and hold for 2 seconds: Switch between front and rear cameras.

What should you keep in mind when installing a phone?

Keep the case clean and dry; Center the phone over the lens window; Secure it with foam padding; Firmly close the front cover to ensure a seal.

How to maintain and care for diving shells?

After each use, especially in saltwater environments, soak the product in fresh water for 10 minutes, then rinse under running tap water for 5 minutes. Ensure no water droplets remain on the product surface before storing it in a dry, well-ventilated location. When rinsing or soaking, make sure to securely close the buckle! The interior of the diving case is not waterproof!

Welcome to TELESIN Support

Tutorial Videos

Documentation

FAQ

Obtenga un 10% de descuento en su primer pedido