TELESIN 360° Action Camera Handlebar Mount
Secure your action camera to a bike handlebar, motorcycle tube, or mirror stem and film the ride hands-free. The low-profile design keeps your camera close to the bar to limit unnecessary movement, while the adjustable ball head makes it easy to level your shot.
- 360° angle adjustment
- Low-profile, stable camera position
- Fits 9–16 mm and 22–38 mm round tubes
- 3-prong and 1/4"-20 mounting options
- Optional phone holder available
- Lightweight, fiber-reinforced nylon body
Measure the outside diameter of the tube before ordering. This clamp fits two separate ranges: 9–16 mm and 22–38 mm.
Keep Your Camera Close and Stable
Long extension arms can magnify every bump in the road. This action camera handlebar mount holds your camera closer to the bar, creating a lower center of gravity and a steadier base for everyday riding footage.
It is a practical setup for recording commutes, bike routes, trail rides, and motorcycle trips without taking your hands off the controls. Actual footage will still depend on the road surface, riding speed, camera weight, and your camera’s stabilization settings.
Set the Angle Before You Ride
A handlebar is not always level, and a fixed mount can leave the horizon tilted. The 360° ball head lets you rotate, tilt, and level your camera without repositioning the clamp.
Loosen the ball-head knob, frame your shot, then tighten it to hold the camera in place. Point it forward to capture the road, turn it toward the rider, or set a side angle for a different perspective.
Strong Grip, Straightforward Setup
The clamp uses a screw lock for quick installation and removal. Tighten it until the mount no longer turns or slides on the tube, then use the separate ball-head knob to set the camera angle.
A soft cushion improves contact on supported smaller tubes and helps protect the mounting surface. The fiber-reinforced nylon body keeps the mount light, while corrosion-resistant stainless steel hardware makes it better suited to regular outdoor use.
Check the Tube Diameter
The clamp is made for secure, round tubes in the following sizes:
|
Tube size |
Typical uses |
|
9–16 mm |
Selected narrow tubes and motorcycle mirror stems |
|
22–38 mm |
Many bicycle and motorcycle handlebar sections |
These are two separate size ranges. Do not assume the mount fits every tube between 9 mm and 38 mm. If your tube measures between 16 mm and 22 mm, confirm the fit before purchasing.
For a secure installation, avoid tapered, flexible, damaged, or irregularly shaped surfaces. Make sure the clamp sits evenly and does not interfere with brakes, cables, mirrors, steering, or other controls.
Camera and Phone Compatibility
Two included mounting options make it easy to adapt the clamp to different shooting setups.
|
Connection |
Use it with |
|
3-prong adapter |
GoPro-style action camera mounts |
|
1/4"-20 adapter |
Cameras, cages, and accessories with a matching threaded socket |
|
Phone holder |
Smartphones; included only with the phone kit |
The 3-prong adapter works with compatible GoPro cameras, DJI Osmo Action setups, and other action cameras that use the same mounting system.
Selected Insta360 cameras and cages can connect through the 1/4"-20 adapter. Some models may need a separate frame, cage, or adapter, so check the connection on your specific device before ordering.
Phones cannot attach directly to the 1/4"-20 screw. Choose the kit with the phone holder if you plan to film with a smartphone.
Choose Your Kit
Basic
Designed for action cameras and devices that connect through the supplied 3-prong or 1/4"-20 adapter.
Choose this option for:
- GoPro-style action cameras
- Compatible DJI Osmo Action setups
- Selected Insta360 cameras or cages
- Accessories with a 1/4"-20 socket
- A phone holder is not included.
Basic + Phone Clip
Includes the core handlebar mount setup plus a phone holder. Choose this option if you plan to record with a smartphone.
Make sure your phone fits securely inside the holder before riding.
How to Install It
1. Measure the tube. Check the outside diameter and confirm that it falls within the 9–16 mm or 22–38 mm range.
2. Attach the clamp. Place it around the tube and tighten the locking knob until it cannot rotate or slide. Add the soft cushion where needed.
3. Mount your device. Use the 3-prong adapter for a compatible action camera, the 1/4"-20 adapter for a matching camera or accessory, or the phone holder for a smartphone.
4. Set the angle. Loosen the ball-head knob, level the camera, and tighten the knob firmly.
Check the clamp, adapter, and camera before every ride. Never adjust the mount while moving. For off-road, high-speed, or high-vibration use, add a suitable camera safety tether.
