Anti-Reflection Screen Protector for DJI Pocket 3
See your Pocket 3 screen clearly in harsh sunlight while keeping it fully protected.
- Ultra-low 0.7% reflectance for clear outdoor viewing
- 95% light transmission and <1% haze for true-to-life image quality
- 9H glass with an auto-alignment frame for quick, bubble-free installation
Trusted by creators using DJI Pocket and action cameras, TELESIN designs accessories specifically for real-world outdoor shooting, not just studio specs.
Clear Pocket 3 Viewing in Bright Outdoor Light
When you’re filming with Pocket 3 in bright daylight, the screen can easily wash out with glare. The TELESIN Anti-Reflection (anti-glare) Screen Protector is designed so you can still see your framing, exposure, and focus clearly, even when the sun hits the display directly.
Whether you’re capturing travel vlogs, beach clips, snow scenes, or city streets, your Pocket 3 screen stays readable so you don’t have to guess what you’re recording.
Ultra-Low 0.7% Reflectance vs Standard Screen Protectors
Most standard screen protectors bounce back a lot of light, creating glare that makes the display look hazy. TELESIN uses an advanced AR (Anti-Reflection) coating to dramatically reduce that reflectance.
|
Screen Protector Type |
Reflectance (Approx.) |
Outdoor Clarity in Bright Light |
|
TELESIN AR Screen Protector |
0.7% |
Clear, minimal reflections |
|
Standard Screen Protector |
4–5% |
Hazy, strong reflections & glare |
By cutting reflectance down to around 0.7%, the TELESIN protector keeps the Pocket 3 display clean, contrasty, and easy to read, even in direct sun.
High Transmission & Low Haze for True Image Quality
A good anti-reflection screen protector should reduce glare without dimming or blurring the display.
|
Optical Parameter |
TELESIN AR Film |
Typical Non-AR Film |
|
Light Transmission |
95% |
~91% |
|
Image Clarity |
99% |
~93% |
|
Haze |
<1% |
Noticeably higher |
High transmission and ultra-low haze mean your Pocket 3 display still looks bright, vivid, and detailed—just without the glare. So you can see your footage accurately and adjust settings with confidence.
Real AR Coating for Pocket 3, Not Just Matte Glass
How Multi-Layer Anti-Reflective Coating Works
Most “matte” or cheap films simply roughen the surface and scatter light. They reduce glare, but at the cost of a milky, soft-looking screen.
The TELESIN AR protector uses a true multi-layer optical coating that:
Reduces surface reflections
Preserves sharpness and color
Adds extra strength to the glass
AR Coating Structure:
|
Layer Order (Top → Bottom) |
Function |
|
Anti-Reflection Layer |
Cuts surface reflections and glare |
|
Light-Filtering Layer |
Enhances contrast & perceived sharpness |
|
Reinforcement Layer |
Adds structural strength & impact resistance |
|
Ultra-Clear AR Coating |
Preserves color and 99% image clarity |
These layers work together to keep your screen clear and high-contrast while controlling reflections at the optical level.
Fake Matte Coatings vs True Optical AR Coating
|
Coating Type |
Screen Appearance |
Main Issue |
|
Cheap Matte / Fake “AR” Film |
Hazy, low contrast |
Glare reduced but image looks blurry |
|
TELESIN True AR Coating |
Clear, high detail |
Glare reduced while clarity preserved |
With TELESIN, you get glare reduction without killing clarity, so Pocket 3 text, icons, and video previews remain sharp.
Why Outdoor Pocket 3 Vloggers Need AR Screen Protection
If you frequently:
Shoot vlogs and travel content in harsh daylight
Film snow, beach, or water where reflections are intense
Record backlit subjects or high-contrast scenes
This AR protector helps you see your histogram, exposure, and framing accurately. You spend less time shading the screen with your hand and more time actually shooting.
9H Glass Protection for Everyday Shooting
Aluminum Glass, Scratch & Drop Resistant
The protector is made of 9H-hardness aluminum-silicate glass, providing your Pocket 3 screen with reliable protection against everyday damage.
|
Protection Feature |
Real-World Benefit |
|
9H Hardness Glass |
Resists scratches from keys, coins, gear |
|
Reinforced Structure |
Helps absorb minor bumps and knocks |
|
Shock & Scratch Resistant |
Keeps the original screen safe during travel |
You can toss your Pocket 3 into a camera bag with other gear without constantly worrying about the display.
Edge-to-Edge Coverage with No Light Leakage
TELESIN cuts the protector precisely to match the Pocket 3 display:
True edge-to-edge coverage for a clean, integrated look
No distracting black borders blocking UI elements
No light leakage along the edges—brightness stays uniform
Dust-Proof Fit with No Lifting or White Edges
Poorly sized films can lift, trap dust, or develop white halos along the edge. This design avoids those issues:
|
Fit & Edge Detail |
Result Over Time |
|
Precision CNC cutting |
Accurate alignment with Pocket 3 screen |
|
Full-adhesive back |
Strong, uniform adhesion |
|
Edge optimization |
No lifting, no dust lines, no white edges |
Your screen protector stays firmly in place and keeps a clean, professional look even after months of use.
Smooth Touch & Clean Screen for Long Shooting Days
HD Touch Response Like the Bare Pocket 3 Screen
The AR glass is tuned to work seamlessly with the Pocket 3 touchscreen:
Taps, swipes, and gestures feel natural and responsive
No noticeable input delay or dead spots
Smooth glass surface lets your finger glide effortlessly
You get that bare-screen touch experience, with added protection and glare reduction.
Fingerprint-Proof Surface with ≥115° Hydrophobic Coating
A dual hydrophobic and oleophobic coating helps repel oil, sweat, and fingerprints:
|
Surface Parameter |
TELESIN AR Protector Value |
|
Water Contact Angle |
≥115° |
|
Coating Type |
Hydrophobic & Oleophobic |
This means:
Fewer visible smudges and streaks
Easy cleaning with a quick wipe
A clearer view during long shoots, even in hot or humid conditions
So you spend less time wiping the screen and more time capturing footage.
2.5D Comfort-Fit Edges
The protector features 2.5D rounded edges for comfort and durability:
Smooth transitions that feel nice in hand
Reduced risk of edge chipping compared with sharp-cut glass
Good compatibility with most Pocket 3 grips, cages, and cases
It feels like a natural part of your Pocket 3, not an awkward add-on.
Easy, Bubble-Free Installation with Auto-Alignment Frame
Is It Easy to Install If You’ve Never Applied a Film Before?
Yes. The kit is designed for first-time users and includes an auto-alignment frame and accessories for a clean installation.
How the Auto-Alignment Frame Helps
|
Installation Feature |
What It Does |
|
Auto-Alignment Frame |
Centers the protector with minimal effort |
|
Guided Drop Placement |
Aligns corners and edges automatically |
|
Edge-to-Edge Guidance |
Keeps the glass parallel to the screen |
Simply snap the frame onto your Pocket 3, place the protector inside, and let it settle into position.
Bubble Reduction & Dust Control
The adhesive system is designed to:
Bond on contact, pushing air outward from the center
Work well with standard dust-removal steps (wipes, dust stickers)
Let small bubbles dissipate naturally after a short time
Even if you’re not experienced with screen protectors, you can still achieve a clean, nearly bubble-free installation.
By bundling the TELESIN Anti-Reflection Screen Protector with the right filters and protection accessories, you turn your Pocket 3 into a more reliable, outdoor-ready shooting kit—with clearer monitoring, better protection, and smoother shooting every time you head out.
FAQs
Q1: Does this AR screen protector affect Pocket 3 touch sensitivity?
A: No. The AR glass is tuned for the Pocket 3 touchscreen, so taps, swipes, and gestures remain fast and precise. It feels very close to using the bare screen, with no noticeable input delay or dead zones.
Q2: Will the screen look dimmer after applying the AR coating?
A: No. With up to 95% light transmission and <1% haze, the screen stays bright and sharp. You get less glare without the milky or washed-out look that cheap matte or “frosted” films often cause.
Q3: How much glare reduction can I expect outdoors compared with a normal film?
A: Standard films typically reflect around 4–5% of incoming light, which creates heavy glare in bright conditions. The TELESIN AR protector reduces reflectance to around 0.7%, so the Pocket 3 screen remains much clearer and more readable in direct sunlight.
Q4: Is the protector easy to install if I’ve never applied a screen film before?
A: Yes. The kit includes an auto-alignment frame that snaps onto your Pocket 3 and guides the glass into position. You simply attach the frame, place the film, and let it settle—air is pushed out toward the edges, helping to minimize bubbles even for first-time users.
Q5: Does it fully cover the Pocket 3 screen without leaving white or black edges?
A: Yes. The protector is precisely cut for the Pocket 3 display, offering true edge-to-edge coverage. There are no white halos, no misaligned borders, and no black edges blocking the user interface or framing area, and no light leakage along the sides.
Q6: How resistant is it to scratches, drops, and camera-bag wear?
A: The protector uses 9H hardness aluminum-silicate glass with a reinforced structure. It helps protect the Pocket 3 screen from scratches caused by keys, coins, and other gear in your bag, as well as from minor knocks and everyday bumps during shooting.
Q7: How well does the fingerprint-proof coating work over time?
A: The hydrophobic and oleophobic coating, with a water contact angle of ≥115°, is designed to repel oils, sweat, and fingerprints effectively. Over time, normal wear may slightly reduce the effect, but with regular cleaning the surface stays clear, smooth, and easy to wipe.
Q8: Is this screen protector only for Pocket 3, or does it fit other Pocket models?
A: This AR screen protector is custom-designed for DJI Pocket 3. For the best fit, edge coverage, and touch performance, it is not recommended for other Pocket models; those devices should use their own model-specific protectors.
